Follow

RADIUS service does not start on Server 2012 Domain Controller

Issue

After installation of the AuthAnvil RADIUS server the AuthAnvil RADIUS server service will not start.
The follow error will occur:

Windows could not start The AuthAnvil RADIUS Server service on Local Computer. 
Error 1053: The service did not respond to the start or control request in a timely fashion.

 

Cause

A .NET feature is not enabled by Windows Server 2012 when the AuthAnvil RADIUS server is installed. 

 

Resolution

From the Server Manager Add the Named Pipe Activation of WCF Services.

Manage >  > Add Roles and Features > Features >  .NET Framework 4.5 Features (Installed) > WCF Services (Installed) >  Enable - Named Pipe Activation.

When a service starts, the service communicates to the Service Control Manager how long the service must have to start (the time-out period for the service). If the Service Control Manager does not receive a "service started" notice from the service within this time-out period, the Service Control Manager terminates the process that hosts the service. This time-out period is typically less than 30 seconds. If you do not adjust this time-out period, the Service Control Manager ends the process. To adjust this time-out period, follow these steps:

IMPORTANT: Incorrect use of the Microsoft Windows Registry Editor may cause serious problems with your computer, up to and including general operating system corruption and inability to boot. Registry editing should only be performed by those who are sufficiently experienced in the use of the registry editor application.
  1. Go to Start > Run > and type regedit
  2. Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
  3. With the control folder selected, right click in the pane on the right and select new DWORD Value
  4. Name the new DWORD: ServicesPipeTimeout 
  5. Right-click ServicesPipeTimeout, and then click Modify
  6. Click Decimal, type '180000', and then click OK
  7. Restart the computer

The Microsoft Windows Service Control Manager controls the state (i.e., started, stopped, paused, etc.) of all installed Windows services. By default, the Service Control Manager will wait 30,000 milliseconds (30 seconds) for a service to respond. However, certain configurations, technical restrictions, or performance issues may result in the service taking longer than 30 seconds to start and report ready to the Service Control Manager.  

By editing or creating the ServicesPipeTimeout DWORD value, the Service Control Manager timeout period can be overridden, thereby giving the service more time to start up and report ready to the Service. 


Questions?

If you have any questions or need some help, we would be happy to assist. Open a case at help.scorpionsoft.com or send an email to support@scorpionsoft.com.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk