Follow

How do I set up Citrix XenApp and XenApp Fundamentals to work with AuthAnvil RADIUS?

Configuring XenApp or XenApp Fundamentals to support RADIUS Authentication

Step 1 - Go to the Start Menu and click on ‘All Programs’, then ‘Citrix’, then ‘Management Consoles’, then open ‘Access Management Console’. 

 

Step 2 – Expand ‘Citrix Resources’, then ‘Configuration Tools’, then ‘Web Interface’, then click on the site that you want to add two factor authentication to. 

 

Step 3 – Click ‘Configure authentication methods’ 

 

Step 4 - Select ‘Explicit’ then click ‘Properties’

 

Step 5 – Click on ‘Two-Factor Authentication’, then set the ‘Two-factor setting’ to ‘RADIUS’ 

 

Step 6 - Type in the IP address and port of the AuthAnvil Radius Server, then click ‘OK’. (The AuthAnvil Radius Server runs on port 1812 by default) 

 

Step 7 - Click ‘OK’, then ‘OK’ again, and close the Citrix Access Management Console.

Step 8 – XenApp and XenApp fundamentals require that the RADIUS secret that has been configured between this client and the AuthAnvil RADIUS Server is placed in a text file in the Citrix\RADIUS\CONF directory. 

 

  1. Go to C:\inetpub\wwwroot\Citrix\<site_name>\conf folder and create a file called radius_secret.txt.
  2. Open this text file and enter your RADIUS shared secret passcode.
  3. Save the file and close it.
  4. For Web Interface 5.2 or later: Go to folder and open the file Web.config with a text editor like Notepad. On Java application servers, the file is web.xml file. 
    C:\inetpub\wwwroot\Citrix\<site_name>\
  5. Search for line # 102 or the following parameter:
    <add key="RADIUS_NAS_IDENTIFIER" value="" />12.
  6. For value, enter any alphanumeric value longer than 3 characters.
  7. Save the Web.config file and test your Web Interface site.
  8. To test the Site, log on to the website you protected with AuthAnvil. You will now see a Passcode field.
    - The passcode for this field is your AuthAnvil PIN + the next OTP from your token.

 

 

Questions?

If you have any questions or need some help, we would be happy to assist. Open a case at help.scorpionsoft.com or send an email to support@scorpionsoft.com.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk